1. Repositorio Institucional del Tecnológico Nacional de México (RI - TecNM)
2. Tesis de Posgrado
3. Guanajuato
4. Instituto Tecnológico de Celaya
5. Tesis de Maestría
6. Maestría en Ciencias en Ingeniería Electrónica

Título :	Estimación de los estados de carga y salud de una batería de ion-litio
Autor :	CONTRERAS SILLERO, ALINA ARACELI%646606
Fecha de publicación :	2018-06-01
Editorial :	Tecnológico Nacional de México
metadata.dc.publisher.tecnm:	Instituto Tecnológico de Celaya
Descripción :	Currently, technologies have been inclined to use green energy from natural resources. Research has overseen extracting and incorporating these energies into the electrical grid, however, the biggest drawback of techniques it is that is not possible to control quantity and/or duration, consequently, storage devices such as batteries must be used. Batteries currently play a significant role in the use of electric power. Such devices have applications on a small and large scale; for low power applications (low scale), batteries are used in portable electronic devices such as cell phones, computers, fans, etc.; on the other hand, for high power applications (large scale), these sources are used as energy reserve for automotive applications, energy injection to the grid, among others. The battery is the most used device to store energy by its practicality and efficiency that it grants to the user. A battery ages in proportion to the charging and discharging cycles; Such processes degrade the chemicals that make up the storage device; a low charge results in stratification and sulphation effects that shorten battery life, while overcharging causes gas and water loss. Because power is stored in a limited battery, it is important to have the ability to determine the available capacity, the state of charge (SOC), and health state of health (SOH) of said device; this ensures that the battery has the power available to be used. This work consists of the design and implementation of a battery management system (BMS) for a Lithium-Ion battery which allows us to know the SOC and SOH of it. The method that was used to carry out the calculation was by the "Coloumb count" due to its efficiency and practicality, likewise, this allowed us to characterize the battery and thus obtain its transfer function. Additionally, a comparison was made of the charging methods indicated in [8] but also using a commercial charger.
metadata.dc.type:	info:eu-repo/semantics/masterThesis
Aparece en las colecciones:	Maestría en Ciencias en Ingeniería Electrónica

Este ítem está protegido por copyright original Visualizar la licencia

Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons